대원인더스트리얼

본문

There may be differences in using photos on the site.

The joint partial testing equipment (separated type) can be applied to every sewer pipe and can be used for water-tightness and pneumatic pressure test of new pipe or upon transfer of a pipe after repair.The equipment is made integrated, so that it can precisely and safely test a short check point.

2 frames are 1 set

Part Number	Usage Size		Inflation Pressure		Maximum Back Pressure		Maximum Pressure Check Point(Water)		Product Weight		Product Length		Deflated Diameter
Part Number	Ø	inch	Kgf/㎠	bar	Kgf/㎠	bar	Kgf/㎠	bar	kg	lb	mm	inch	Ø	inch
SB-150	150	6	2.0	1.96	0.6	0.59	1.0	0.98	4.0	8.81	700 x 2	28	130	5.2
SB-150	150	6	2.0	1.96	0.6	0.59	1.0	0.98	4.0	8.81	500 x 2	20	130	5.2
SB-200	200	8	2.0	1.96	0.6	0.59	1.0	0.98	6.2	13.6	700 x 2	28	160	6.4
SB-200	200	8	2.0	1.96	0.6	0.59	1.0	0.98	6.2	13.6	500 x 2	20	160	6.4
SB-250	250	10	2.0	1.96	0.6	0.59	1.0	0.98	8.0	17.6	700 x 2	28	183	7.3
SB-250	250	10	2.0	1.96	0.6	0.59	1.0	0.98	8.0	17.6	500 x 2	20	183	7.3
SB-300	300	12	2.0	1.96	0.6	0.59	1.0	0.98	9.8	21.6	700 x 2	28	236	9.4
SB-300	300	12	2.0	1.96	0.6	0.59	1.0	0.98	9.8	21.6	500 x 2	20	236	9.4
SB-350	350	14	2.0	1.96	0.6	0.59	1.0	0.98	12.0	26.4	700 x 2	28	287	11.5
SB-350	350	14	2.0	1.96	0.6	0.59	1.0	0.98	12.0	26.4	500 x 2	20	287	11.5
SB-400	400	16	2.0	1.96	0.6	0.59	1.0	0.98	15.0	33.0	700 x 2	28	340	13.6
SB-400	400	16	2.0	1.96	0.6	0.59	1.0	0.98	15.0	33.0	500 x 2	20	340	13.6

Use of Product : Separated tester after repair of pipe

Partial Testing Packer Assembly Type Equipment(Separated Type) > Equipment for pipe

본문